Delta DOP-300S DOP-3S10S3E2 10.1-inch IIoT Touch HMI
DOP-3S10S3E2 is a Delta DOP-300S 10.1-inch touch hmi with 1024 × 600 pixel TFT LCD display. It operates on 24V DC and provides RS-232, RS-422, RS-485; Ethernet × 2; USB Host Type-A × 1, Type-C × 1. Project configuration uses DIAScreen. Suitable for operator visualization with compatible external controllers.
| Model | DOP-3S10S3E2 |
|---|---|
| Warranty | 12 Months |
| Brand | Delta |
|---|---|
| Series | DOP-300S |
| Model | DOP-3S10S3E2 |
| Part No | DOP-3S10S3E2 |
| HMI Type | Touch HMI |
| Display Size | 10.1″ |
| Display Resolution | 1024 × 600 px |
| Display Technology | TFT LCD |
| Input Type | Resistive touch |
| Program Memory | 512 MB |
| Memory Card Support | Yes |
| Programming Software | DIAScreen |
| Communication Ports | RS-232, RS-422, RS-485, USB Type-A, USB Type-C |
| Built-in Communication Protocols | EtherNet/IP, Modbus, MQTT, OPC UA |
| PLC Compatibility | Delta Controllers, Protocol/Driver-Dependent |
| Power Supply | 24V DC |
| Dimensions (W × H × D) | 270 × 180.9 × 47.25 mm |
| Panel Cutout Dimensions | 255 × 170 mm |
| Product Weight | 940 g |
| Mounting Orientation | Landscape |
| Protection Rating | IP66, NEMA 4, UL Type 4X (Front) |
| Warranty | 12 Months |
Delta DOP-300S DOP-3S10S3E2 10.1-inch IIoT Touch HMI
DOP-3S10S3E2 is the 10.1 inch DOP-300S operator panel identified in this listing. Its purpose is to let personnel inspect machine status, enter setpoints, acknowledge operator messages and interact with a correctly configured industrial control system. It is an HMI interface, not a standalone PLC or an industrial panel computer. The selected order code is important: a display size, communication connector or hardware suffix from another Delta model must not be used as a substitute when preparing a project, purchasing a replacement, or machining an enclosure.
Display and Operator Interface
The 10.1 inch TFT LCD screen has native resolution 1024 × 600 pixels. Native resolution describes the HMI’s own display rather than a monitor connected through an external interface. Operator entry uses resistive touch, which is suitable for on-screen buttons, menus and numerical entries created in a compatible project. Display elements should be sized for the actual panel and tested using the selected model in the editor. A different screen diagonal or pixel matrix can change text layout and control positioning even within one product family.
Communication and PLC Compatibility
Physical interfaces documented for this listing are RS-232, RS-422, RS-485; Ethernet × 2; USB Host Type-A × 1, Type-C × 1. Physical ports must not be confused with installed communication drivers or active protocols. The specification value for protocols is MQTT, OPC UA, Modbus, EtherNet/IP, and controller compatibility is recorded as Delta controllers; protocol/driver-dependent. Delta publishes MQTT, OPC UA, Modbus and EtherNet/IP among its DOP-300S communication capabilities; actual connections require the appropriate software project, addressing and network configuration. Network connectivity does not automatically enable cloud services, remote viewing or third-party protocols.
Programming and Runtime Functions
HMI projects are prepared using DIAScreen. A project should begin with the exact device selection and its actual communication settings, followed by screen objects, navigation, messages and the appropriate controller addresses. DOP-300S is positioned for connected industrial monitoring, but cloud onboarding, remote access and any service account or licence conditions must be assessed separately. Never treat a network connector as proof that a particular remote protocol is active.
Memory and Storage
The displayed Program Memory field is 512 MB. For this HMI it reflects documented total internal Flash ROM capacity; it is not a separate verification of how much space is available to the user project. Memory-card support is listed as Yes (microSD). Removable media is a supported interface but a memory card is not assumed to be supplied with the panel. Runtime records and historical data should be planned against the actual firmware functions and available storage.
Installation and Typical Applications
The rated power entry is 24V DC. The reported external dimensions are 270 × 180.9 × 47.25 mm (width × height × depth). The listed panel opening is 255 × 170 mm (width × height). Protection is recorded as IP66 / NEMA 4 / UL Type 4X (Front); this should not be interpreted as proof that every exposed connector or rear surface has the same ingress rating. Use the specified fasteners, grounding and panel gasket conditions in the installation guide. Before manufacturing the cabinet, verify the drawing revision, mounting thickness, ventilation clearance and cable bend radius.
Exact Variant Verification
This entry identifies the IIoT variant, not every product in DOP-300S. The installed model number should match DOP-3S10S3E2 exactly. The 7-inch and 10.1-inch DOP-300S units use the same general communication architecture but have different chassis dimensions, cutouts and product weights. If an identified feature is not verified in the source notes, leave it open rather than copying a specification from a similarly named device.
Engineering Integration Checklist
For commissioning, first confirm the unit’s actual nameplate and hardware revision. Prepare a supported power supply and grounding scheme, and verify the display orientation and clearance against the correct mechanical drawing. In the HMI project, choose the device and communication driver deliberately, confirm baud rate or IP addressing, and test reading and writing one safe controller tag before connecting wider machine functions. Store a backup of the accepted project and record the firmware and editor versions. Operator controls should be designed as part of the wider machine safeguarding strategy; an ordinary HMI touch button does not replace a certified emergency-stop circuit or a safety controller.
Official Manufacturer Links
Official Manufacturer Product Page Link:
Official Manufacturer Datasheet / Technical Documentation LInk:
Similar Products:
DOP-300S Series HMI
• 10.1 in TFT LCD, 1024 × 600 px
• Resistive Touch operator entry
• 24V DC rated supply
• RS-232, RS-422, RS-485; Ethernet × 2; USB Host Type-A × 1, Type-C × 1
• HMI software: DIAScreen
• Yes (microSD) memory-card support
• IP66 / NEMA 4 / UL Type 4X (Front)
• DIACloud-capable IIoT platform (activation/service conditions apply)
• Industrial IoT data collection and visualization
• Pump and compressor station monitoring
• Local HMI operator station for PLC systems
• Ethernet-connected equipment dashboards
• Factory machine status and alarm visualization
• Connected production-line monitoring with configured cloud access
Need Help Choosing?
Our automation experts are ready to help you select the right product for your application.
- Application Consultation
- Product Selection Support
- Wiring & Integration Help
- After Sales Support
Chat on WhatsApp
+880 1553-346553















Reviews
There are no reviews yet.