DVP-12SE11T | Delta PLC

The Technical Specifications of Delta DVP SE DVP12SE11T

  • Series: DVP-SE Series PLC
  • Power Supply Voltage: 24 VDC (-15 to 20%)
  • Data register: 12k words
  • Output Method: Transistor (NPN)
  • Operating Temperature: 0°C ~ 55°C
  • Program Capacity: 16k Steps
  • Number of Inputs and Type: 8
  • Number of Outputs and Type: 4
  • Power consumption: 1.5 W

আমাদের যে কোন পণ্য অর্ডার করতে কল বা WhatsApp করুন:-

Delta DVP SE DVP12SE11T​ Technical Specifications:

 

Output Type Transistor NPN
Power supply voltage 24VDC (-15% ~ 20%)
Inrush current Max. 7.5A@24VDC
Power consumption 1.5W
Number of Inputs and Type 8 – Digital Inputs
Number of Outputs and Type 6 – Digital Outputs
Power protection With counter-connection protection on the polarity of DC input power
Protection rating IP20
pike Voltage Durability 1500VAC (Primary-secondary); 1500VAC (Primary-PE); 500VAC (Secondary-PE)
Insulation Impedance >5 MΩ (all I/O point-to-ground: 500VDC)
Noise Immunity ESD: 8 kV Air Discharge
EFT: Power Line, 2 kV
Digital I/O: 1 kV
Analog & Communication I/O
Earth The diameter of the grounding wire shall not be shorter than that of the power supply cable.
(When many PLCs are in use at the same time, please make sure every PLC is properly grounded.)
Storage /Operation Temperature Storage: -25ºC ~70ºC (temperature)
Operation: 0ºC ~55ºC (temperature)
Storage /Operation humidity 5%~95% (humidity)
5%~95% (humidity); pollution degree 2
Max. Input Frequency 200 kHz
Max. Output Frequency 100  kHz
Input impedance 4.7kΩ
Response Time OFF→ON: 2 μs
ON→OFF: 3μs

Reviews

There are no reviews yet.

Be the first to review “DVP-12SE11T | Delta PLC”

Your email address will not be published. Required fields are marked *